Lots of software are suitable for mold design, such as UG, Pro/Engineer, AutoCAD, Cimatron, PowerMill Hypermill, Solidworks, WORKNC, Solid Edge, CATIA, etc. For simple molds, CAD software is fast and easy to use; for molds with a messy structure and more curved surfaces, Pro-E, UG, Mastercam, Solidworks are good choices. Pro-E or UG is commonly used in drawings and production. Each software has it...
1.To determine the gate location according to the plastic part structure and usage requirements. As long as the structure allows, the nozzle and nozzle head in the fixed mold insert does not interfere with the molding structure, and the gate of the hot runner system can be at any position of the plastic part. The position of the injection gate for conventional plastic injection molding is usually ...
1. The overall layout of the mold is reasonable 2. Parting surface selection 3. Layout of 3 runners, selection of glue inlet 4. ejection device 5. water transport arrangement 6. exhaust options 7. Pay attention to the draft angle when parting the mold, the extraction of inserts, the treatment of the rubbing angle, and the selection of material shrinkage 8. Processing drawings should be detailed, b...
1
22
pagesFAQ
Building A, Dingfeng High-tech Park, Shapuwei Community, Song Gang Street, Shenzhen, China, 518105
NO.1 Jinchang Road, Henan Industrial Zone, Chang’an Town, Dongguan City, China
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
© Copyright: 2025 Lyter Engineering Ltd. All Rights Reserved
IPv6 network supported
English
