What Are the Key Points for Mould Design?

  • Oct 30,2021
1. The overall layout of the mold is reasonable
2. Parting surface selection
3. Layout of 3 runners, selection of glue inlet
4. ejection device
5. water transport arrangement
6. exhaust options
7. Pay attention to the draft angle when parting the mold, the extraction of inserts, the treatment of the rubbing angle, and the selection of material shrinkage
8. Processing drawings should be detailed, but simple.
All in all, mold design must consider the ability to demould! Easy to process and to eject!

© Copyright: 2022 Lyter Engineering Ltd. All Rights Reserved

IPv6 network supported