• Who Is Your Main Steel Supplier?
    • Nov 08,2021
    Who Is Your Main Steel Supplier?

    Who is your main steel supplier? LYTER---This depends on customer requirements, for imported steel, we usually use SCHMOLZ+BICKENBACH and GROEDITZ and FLNK. For domestic steel, we always use the best supplier in china, like LKM、FUSHUN.

  • Who Make the Polishing? In House or Outsource?
    • Nov 08,2021
    Who Make the Polishing? In House or Outsource?

    Who make the polishing? In house or out house? We have polishing workers in house. But for really higher polishing requirement, for examples, A1 stand polishing, we outsource, The supplier is about 3km away from our company.

  • Who Is Your Main Mold Base Supplier?
    • Nov 08,2021
    Who Is Your Main Mold Base Supplier?

    LKM and Ftaba for standard mold base of our plastic injection mold. If the mold base is non-standard, we will use suppliers which we have cooperated for a long time and their quality is proved very good.

  • Who is Your Main Hot Runner Supplier?
    • Nov 08,2021
    Who is Your Main Hot Runner Supplier?

    It depends on customer requirements. We mainly use hot runner suppliers like HRS, Yudo, Incoe, Moldmasters, Synventive etc.

  • What's Your Fastest Cycle Time For a Mould ?
    • Nov 08,2021
    What's Your Fastest Cycle Time For a Mould ?

    Fast cycle time requires stable and appropriate mold design, sufficient cooling and venting, also appropriate injection gate positions. We may use 3D printing or beryllium copper material to make inserts that needs enhanced cooling. As a Mould Maker in China, we used to make molds for product of consumer goods, food packaging parts, cosmetic packaging etc. Below sample product is 0.4mm thick, the ...

  • How many Types for Mold Manufacturing?
    • Oct 26,2021
    How many Types for Mold Manufacturing?

    How many types for Mold Manufacturing? There are various types of molds for mold manufacturing. And the most common types are 2 plate mold, 3 plate mold/pin-point gate mold, hot runner manifold mold, thoroughly harden mold, and pre-hardened mold. 1)The two-platen mold, also known as the single parting surface mold, is the simplest type of injection mold. It divides the entire mold into two parts b...

  • Reverse Engineering in Mold Manufacturing?
    • Oct 26,2021
    Reverse Engineering in Mold Manufacturing?

    What is Reverse Engineering in Mold Manufacturing? With the development of computer technology, CAD technology has become an important tool for product designers to conduct research and development. Among them, three-dimensional modeling technology has been widely used in product and mold design, program review, automated manufacturing, as well as management and maintenance. In the actual developm...

  • Our Characteristics of Mold Manufacturing?
    • Oct 22,2021
    Our Characteristics of Mold Manufacturing?

    What are the characteristics of Mold Manufacturing? There are several characteristics of mold manufacturing. Here are some of them for your information. 1.Mold manufacturing belongs to single-piece, multi-variety production. Each mold can only produce a single product, and the mold is generally not universal. 2.Customers require a short mold manufacturing cycle. 3.Complete set of mold manufacturin...

  • Our Basic Requirement for Mold Manufacturing?
    • Oct 22,2021
    Our Basic Requirement for Mold Manufacturing?

    What is the basic requirement for Mold Manufacturing? The basic requirement of mold manufacturing is to shorten the molding cycle and reduce mold costs as much as possible on the premise that the accuracy and life of the mold meet customer requirements. The technical and economic indicators of the mold include mold accuracy, mold production cycle, mold production cost, and mold life. In the mold m...

    A total of

    2

    pages

© Copyright: 2022 Lyter Engineering Ltd. All Rights Reserved

IPv6 network supported

top