The maximum external dimension of the product is 249.37 mm x ø40.88 mm mm, the average thickness is 2.20 mm, the material is PC, the shrinkage rate is 1.006, and it is 41.13 grams. The technical requirements for the plastic parts are that there must be no defects, such as flash, short shot, flow lines, gas mark, warpage deformation, silver streaks, unevenness etc. We can see the picture...
The head of cleaner's function is similar to a mop, and it is an advanced cleaning tool driven by electricity. The maximum external dimension of the product is 335.00 mm x 250.50 mm x 133.67 mm, the average thickness of the plastic part is 2.56 mm, the material is ABS, the shrinkage rate is 1.006, and it’s 334.04 grams. The technical requirements for the plastic parts are that there must...
The reasons for suggesting these two special and ingenious design structures of Plastic Injection Molds. 1. Using large lifter to drive the small lifter ingeniously to reach the purpose. 2. Also perfectly using the structure of lifter when using slide. .
Classification of flow lines: 1) Snake flow line —When the material enters the plastic injection mold cavity from the gate, creating a jet effect, which is displayed on the surface of the product like a snake, so it is called a snake flow line. 2) Wavy line —The material in the cavity flow unevenly, sometimes fast and sometimes slow, which is like a wave on the surface of the product, so it is cal...
What below picture shows is the instrument window panel product, the maximum external dimension of the product is 317.93 mm x 167.80 mm x 118.80 mm, the average thickness of the part is 1.50 mm, the material is PP TD20, the shrinkage rate is 1.012, and it is 161.18 grams. The technical requirements for the plastic parts are that there must be no defects, such as flash, short shot, flow l...
As the below picture shows, it is the product of the intelligent sweeping robot base. The maximum size of this product is 403.13mm x 292.00mm x 170.30mm, the average thickness is 2.30mm, the material is ABS, the shrinkage rate is 1.0045, and it is 777.51 gram. The technical requirements for the plastic parts are that there must be no defects, such as flash, short shot, flow lines, gas mark, warpag...
Dear Customers, Suppliers, Parteners, Wish you all a Merry Christmas and Happy New Year! Here we would like to share the 2022 Chinese Public Festival calendar with you. Hope it can be useful when making schedules for projects sourcing from China. Sincerely Lyter Engineering Team
Dear Members, Industry Colleagues and Partners: After communicating with the organizer of the 2021 DMP Greater Bay Area Industrial Expo, Xuntong Exhibition Company, it is learned that in view of the current complex and severe situation of the new crown epidemic in the country, in order to protect the health and life safety of exhibitors, professional visitors and partners, as well as to ens...
Graphical Description of the Structure of the Plastic Injection Mold Plastic Injection Molding is a processing method used in mass production of some complex-shaped parts. The specific principle refers to: the plastic raw materials melted by heat are pushed by the screw of the injection molding machine into the cavity of the plastic mold under high pressure, and after cooling and solidificati...
Building A, Dingfeng High-tech Park, Shapuwei Community, Song Gang Street, Shenzhen, China, 518105.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
© Copyright: 2024 Lyter Engineering Ltd. All Rights Reserved
IPv6 network supported
Friendly Links :
Toilet Seat Hinges Manufacturer
English
