Home

Search

Search

  • Common Knowledge of Precision Mould Making
    • 2021-11-15

    Injection Mould Manufacturing Today, we are going to share some basic common sense in our injection mold manufacturing process. Since the 1980s, the molds have been developed all the way. Some friends around are talking about injection molds, hardware molds, from time to time. You may ask: What it is the injection mold? Mold is not only the mother of industry, but also the foundation of ...

  • The Hard Rail or the Linear Rail? Which One Is Better in CNC Machining?
    • 2021-11-15

    We often hear that CNC machining centers are divided into hard rails and linear rails. Customers will ask when purchasing a machining center: Is the hard rail better or the linear rail better? What is the difference between the two? 01 What is a hard track? What is a linear track? The hard rail refers to a casting in which the guide rail and the bed are integrated, and then the guide rail is proce...

  • Moldflow Analysis Service
    • 2021-11-15

    Mold flow analysis is to use current CAE software (Moldflow, C-Mold, Z-Mold, etc.) to perform finite element simulation on the plastic parts injection molding, packing, cooling, and warping processes. Mold flow analysis steps First, the continuous parts are discretized by meshing. A limited number of easy-to-analyze elements are used to describe complex objects, and the elements are connected by a...

  • How To Set the Exhaust Groove in the Injection Mold Reasonably
    • 2021-12-10

    During Injection Molding, there will not be much molten material in the vent hole, because the molten material will cool and solidify at the place to block the channel. The opening position of the exhaust port should not be facing the operator to prevent accidental spraying of molten material and hurting people. The clearance between the ejector rod and the ejector hole, the clearance between...

© Copyright: 2022 Lyter Engineering Ltd. All Rights Reserved

IPv6 network supported

top