Home

Search

Search

  • What is gas assisted injection molding process?
    • 2022-04-15

    What is gas assisted injection molding process? Gas assist molding is a low-pressure plastic injection molding process where pressurized nitrogen gas is injected into the mold, pushing the plastic into the mold extremities, while hollowing out thicker sections in the part.  What are the advantages of gas assisted injection molding? Advantages. This process forms a hollow, plastic injection mo...

  • 2K injection mold and molding
    • 2022-04-22

    2K injection molding 2K injection molding: product injection molding with 2 different  plastic materials or 2 colours : efficient and economical.  Where the K come from? The K in ‘multi-K’ comes from the German word for component – “komponente”. So, if you see a reference to 2K or 3K moulding, it simply means that two or three different materials, or components, are used in the moul...

  • Design of Gate and Runner Arrangement of Plastic Injection Molds
    • 2022-10-19

    Lyter Engineering Design of Gate and Runner Arrangement of Plastic Injection Molds We strive to optimize the injection mold design. It mainly refers to the optimization of the design of the gating system and the cooling system. The selection of the gate form and location is very important. The following we will discuss the gating system research and design.           ...

    • 1

      2

© Copyright: 2024 Lyter Engineering Ltd. All Rights Reserved

IPv6 network supported

top