Home

Injection Moulding Machine Operate

What Parameters Do We Need to Focus On During the Injection Molding Process?

What Parameters Do We Need to Focus On During the Injection Molding Process?

  • 2021-11-15

What Parameters Do We Need to Focus On During the Injection Molding Process?

High-quality plastic molded parts must be based on high-quality plastic injection moulds. There are no high-quality molds, there will have no quality products, even with a powerful injection molding technician. Just like the old saying, no women can cook good dinner without ingredients. However, high-quality plastic moulds are also closely related to the injection molding process in order to make high-quality products. The following small series will introduce you the key process parameters in our injection molding parameters.

1. Plastic Parts Molding Cycle


Plastic Parts Molding Cycle, which includes injection time and product cooling time, the effective control of these times has a profound impact on the quality of the product. Before injection molding, we should clarify the product molding cycle by sample pattern and other methods.

2. The temperature of the Injection Mould


Different plastic particles, the temperature and speed of crystallization are different, and the appearance, deformation, size, and plastic mold of the product have different requirements, which makes the temperature of the injection mold use. Under different plastics, product requirements, etc., the control of the mold temperature is not the same.

3. Molten Plastic Injection Pressure

Molten Plastic Injection Pressure, plastic in the process of filling the mold cavity is facing a lot of resistance, which makes the injection pressure directly determines the size, weight, density, appearance and so on! If any of these factors are affected, then the product becomes a scrap. This requires the injection engineer to reasonably define the injection pressure control based on the combined factors of the product.

4. The speed of Injection


The speed of injection has an important impact on the final appearance quality of the product. The injection speed is generally achieved by adjusting the amount of oil supplied to the injection cylinder per unit time.

5. The Temperature of the Barrel and the Melt


The temperature of the melt can be measured at the nozzle or by the air jet method. The melt temperature plays a major role in the flow properties of the melt. The plastic has no specific melting point. The so-called melting point is a molten state. The temperature range below. The control of both temperatures also plays a crucial role in the quality of the product.

Process parameters that require attention in the injection molding process generally include those items as above. These process parameters are not divided into major and minor factors. Each factor is crucial for the quality of injection molding products. It is necessary for injection molding engineers to make reasonable information according to different products and different plastic types. The reference to the process parameters has guaranteed the quality requirements of the product.

© Copyright: 2022 Lyter Engineering Ltd. All Rights Reserved

IPv6 network supported

top