• 2022-09-09

Calculation of the Stiffness and Strength of the Plastic Injection Mold --China Plastic Injection Mold Maker Lyter Engineering Ltd share For quality plastic injection molds, when the plastic melt is filling the cavity, the pressure on the cavity gradually increases. When the cavity is completely filled, the pressure in the cavity reaches the maximum value. Then, as the plastic melt cools, the pres...

• 2022-09-21

Lyter Engineering_Design of the ejection system of plastic injection mold A good mold reflects the comprehensive level of a plastic injection mould maker. A good design plastic injection mould requires continuous improvement of various technologies. Today we will talk about the ejection system of the mold. Based on years of work experience, we have summed up the principles of ejectors arrangement:...

• 2022-10-19

Lyter Engineering Design of Gate and Runner Arrangement of Plastic Injection Molds We strive to optimize the injection mold design. It mainly refers to the optimization of the design of the gating system and the cooling system. The selection of the gate form and location is very important. The following we will discuss the gating system research and design.           ...

• 2022-10-19

Lyter Engineering_Design of Gate and Runner Arrangement of Plastic Injection Molds (2) The principle of runner arrangement   1) Make the distance of melten plastic material from the sprue to each gate as equal as possible. 2) Make the pressure center of the cavity coincide with the center of the injection machine as much as possible. Balanced arrangement of runners 1) Natural balance: Th...